Industrial ceiling fan: installation of oversized industrial ceiling fans

The super-large industrial ceiling fan has the characteristics of large air volume, energy saving and wide coverage. They are welcomed by many large enterprise workshops. The weather is hot and many customers can't wait to get them up and running as soon as possible. See what to keep in mind when installing an oversized industrial ceiling fan:
Due to the low running speed and high torque of the product, it is not stopped according to reasonable normal switching steps. Remember to turn off the inverter before turning it down until the fan is running normally, and often stop the "stop state" of the shutdown knob to avoid direct shutdown or safety hazards.

Where oversized industrial ceiling fans are needed, the roof of the building is uninsulated. When installing, consider using fan-mounted extension rods. Fan blades should be as far away from the roof as possible so that hot air above the space is not blown into the lower work area by oversized industrial ceiling fans.
Industrial large ceiling fans are widely used. According to its unique streamlined blade design, this design can reduce the kinetic energy of small resistance, high-power electrical energy to the air, make the body sweat and evaporate a large area, and naturally cool the body at 5-7 degrees.

The product runs at low speed and has high torque, so it is not stopped according to reasonable normal switching steps. Remember to turn off the inverter before adjusting the speed of the inverter to a low level, until the fan is operating normally, the "stop state" of the closing knob is often stopped to avoid direct shutdown or safety hazards.
Industrial large ceiling fans and oversized industrial ceiling fans can be installed in places where there is no compartment, but only when the upper part of the carriage is 1.5m or higher from the roof at a safe height, so they can be installed according to the situation.